S21HT

Note when setting to be able to use a radio

• Replacement of the DLL

  So keep a little better the sensitivity of the antenna.

  1. 1.09.25.23 rilphone.cab run forward to the Touch Diamond
• Limit release of Band

  Remains in the original can be chosen by changing the value of the registry because you can not set a certain part of the frequency band 76.0 ~ 90.0MHz 87.5 ~ 108.0MHz Japan so over a range of settings.

  1. FM_JP.cab transferred to the Touch Diamond and run the

     [HKEY_LOCAL_MACHINE\Software\HTC\FMRadio\FMPlayer] “Band”=dword:0000000 1 

• Listen to FM radio with earphones that normally use

  Can listen to the radio even if it is not equipped with a microphone and the supplied earphones to use the USB audio adapter "slim".

  1. USB audio adapter "slim" to buy.

Reference: Japan corresponding change in the frequency band of the FM radio of non-Japan

Described because the request was received and want to write about and e-mail settings EMnet SMS.

• Remove ArcMMS

  Run the DelArcMMS.mscr, deletes the association ArcMMS

  1. DelArcMMS.mscr transferred to the Touch Diamond and run the
     (To BsB6.5.1G but should be able to run for MortScript is already, if you can not MortScript-4.2-PPC.cab please run after the installation.)
• Preparing for the MMS Lite installation

  Write registry information to be able to receive SMS or MMS Lite is running in PreSetupMMSLite.exe.

  1. PreSetupMMSLite.zip unzip, and run it transferred to the Touch Diamond a PreSetupMMSLite.exe
• Installation of the MSS Lite

  To be able to use SMS and MMS to install the MMSLite.1.1.320.wm6.cab

  1. MMSLite.1.1.320.wm6.cab transferred to the Touch Diamond and run the
• Setting MMSLite

  Run rewritten to suit your environment MMSLite.mscr, reflect the setting

  1. MMSLite.mscr download to fix the e-mail address, etc.

      Case(YES) RegWriteDword( "HKCU", "Software\MMS Lite\Profiles\MMS", "AllowDeliveryReport" , 1 ) RegWriteDword( "HKCU", "Software\MMS Lite\Profiles\MMS", "AllowReadReport" , 1 ) RegWriteDword( "HKCU", "Software\MMS Lite\Profiles\MMS", "AutoRetry" , 1 ) RegWriteString( "HKCU", "Software\MMS Lite\Profiles\MMS", "EmailAddres", " 自分のメールアドレス@emnet.ne.jp " ) RegWriteDword( "HKCU", "Software\MMS Lite\Profiles\MMS", "ForceAutoRecv" , 1 ) RegWriteDword( "HKCU", "Software\MMS Lite\Profiles\MMS", "ForceConnect" , 0 ) RegWriteString( "HKCU", "Software\MMS Lite\Profiles\MMS", "MmsGateway", " 10.56.46.1:8080 " ) RegWriteString( "HKCU", "Software\MMS Lite\Profiles\MMS", "MmsServer", " http://mms.internal.emnet.ne.jp " ) RegWriteDword( "HKCU", "Software\MMS Lite\Profiles\MMS", "MsgDurationPeriod" , 0 ) RegWriteDword( "HKCU", "Software\MMS Lite\Profiles\MMS", "RequireDeliveryReport" , 0 ) RegWriteDword( "HKCU", "Software\MMS Lite\Profiles\MMS", "RetryCount" , 0 ) RegWriteDword( "HKCU", "Software\MMS Lite\Profiles\MMS", "RetryTimeout" , 30 ) RegWriteDword( "HKCU", "Software\MMS Lite\Profiles\MMS", "SaveSent" , 1 ) RegWriteDword( "HKCU", "Software\MMS Lite\Profiles\MMS", "ServerPort" , 80 ) RegWriteString( "HKCU", "Software\MMS Lite\Profiles\MMS\UserAgent", " Default ", " S21HT " ) RegWriteString( "HKCU", "Software\MMS Lite\Profiles\MMS\UserAgent", " S21HT ", " S21HT/ArcSoft-MMSUA-PPC-v50 " ) RegWriteDword( "HKCU", "Software\MMS Lite\Profiles\MMS\Connections", " EMnet " , 0 ) 

  2. Transferred to the Touch Diamond and run the modified MMSLite.mscr
• Checking the Configuration

  Check that the setting is reflected in

  1. To is that you have selected the ones EMnet: "Select the connection you want to use"
  2. "Email address:" People are anxious to send but does not seem a problem but would have been telephone number is displayed, so that address information is recorded in the registry is changed to address.

Note: Touch Diamond ROM EMnet mail in the roasted (S21HT).

Flick to set the input to install and convenient tool.

• gsGetFile.dll version International

  DLL that provides a dialog that extend the capabilities of the file selection dialog

  1. gsgetfile-i.zip unzipped, and copied to the Windows folder in the ARMRel gsGetFile.dll
• FileDialogChanger (version provisional measures WM6.5)

  Switch to the dialog tool provided by the file selection dialog gsGetFile.dll

  1. filedlgchg_WM6_5.zip unzipped, and copied to the Windows folder filedlgchg.cpl
  2. → System → File Dialog Changer select Start → Settings
  3. Check the "Exchange Standard File Dialog", setting completed
• touchkeysip

  SIP software input panel

  1. touchkeysip112.zip Unzip the installation transferred to S21HT the touchkeysip.ARM.CAB
• modified version gesture10key

  Script to perform the input touchkeysip flick

  1. key0167.zip gesture10key change in the name of the folder you unzipped the, was extracted
  2. change in the gesture10key gesture10key_x17.txt the gesture10key_x15_mst_vga_x04ht.txt
  3. change in the gesture10key gesture10key_x17.bmp the gesture10key_x_mst_vga.bmp
  4. change in the gesture10key_x17.txt gesture10key_x17.bmp the gesture10key_x_mst_vga.bmp
  5. transferred within the touchkeysip in the Program Files folder of S21HT the gesture10key
  6. Start the input Start → Settings → Personal →, press the "Options" button and select "touchkeysip" from the list box.
  7. Selected in the folder and press the browse button, you just copied the "gesture10key_x17.txt", setting completed
• Mosquito mute camera
  1. x04ht-Camera.zip unzipped, and copied to the Windows folder CameraRc.dll.0411.mui
  2. Copy the S21HT the SDKCerts.cab are enclosed in x04ht-Camera.zip, reboot after installation

This basic environment is complete.
After that, plans to put the software of your choice.

Make the connection settings for packet communication.

Setting EMnet

1. Select Start → Settings → Connections → Connections
2. Pressing the "Select Network" → Advanced
3. Press "Add ..." the law of "~ automatic to the Internet"
4. Press the "OK" Enter the ISP name EMnet
5. Press "Edit ..." in the list box to select the EMnet the law of "~ automatic to the Internet"
6. Pressing the "New"
7. To select "EMnet" in connection name, type of modem "Cellular Line (GPRS, 3G)", and press "Next"
8. Enter "emnet.connect" the name of the access point, press "Next"
9. (Please refer to the manual because it tentatively to the asterisk) and press "Finish", enter "*******" in the user name and password
10. Press the "proxy server settings", go back to the "Settings → Connections → Connections" (work rather than in the advanced settings)
11. Check the press "- using a proxy server", enabled the "Advanced ..."
12. Select the "HTTP", "wm.internal.emnet.ne.jp" to the server, the port enter "8080", press the OK
13. Select the "Socks", "wm.internal.emnet.ne.jp" to the server, the port enter "1080", press the OK

Setting the emb

1. Select Start → Settings → Connections → Connections
2. Pressing the "Select Network" → Advanced
3. Press "Add ..." the law of "~ automatic to the Internet"
4. Press the "OK" Enter the ISP name emb
5. Press "Edit ..." in the list box to select the emb of the law of "~ automatic to the Internet"
6. Pressing the "New"
7. To select "emb" in connection name, type of modem "Cellular Line (GPRS, 3G)", and press "Next"
8. Enter "emb.ne.jp" the name of the access point, press "Next"
9. (Please refer to the manual because it tentatively to the asterisk) and press "Finish", enter the "**" to the user name and password

Complete the connection setup at least.
Next time, I plan to install the tool useful.

Change the Meiryo the Font, to adjust the size.

1. MeiryoKaiRev2.zip unzipped, and copied to the windows folder of the meiryo.ttf S21HT
2. Start the PHM Registry Editor, the following changes to the contents of the registry

   HKEY_LOCAL_MACHINE \ Software \ Microsoft \ FontLink \ SystemLink

   • \ Windows \ msgothic.ac3, the value of the Courier New, \ windows \ meiryo.ttf from MS UI Gothic, change to meiryo
   • \ Windows \ tahoma.ttf, the value of the Helvetica Neue OTS, \ windows \ meiryo.ttf from Tahoma, change to meiryo
   • \ Windows \ tahoma.ttf, the value of the 35 Thin HelveticaNeue LT, \ windows \ meiryo.ttf from Tahoma, change to meiryo
   • \ Windows \ tahoma.ttf, the value of the MS Gothic, \ windows \ meiryo.ttf from Tahoma, change to meiryo
   • \ Windows \ tahoma.ttf, the value of the MS PGothic, \ windows \ meiryo.ttf from Tahoma, change to meiryo
   • \ Windows \ tahoma.ttf, the value of the MS UI Gothic, \ windows \ meiryo.ttf from Tahoma, change to meiryo
   • \ Windows \ msgothic.ac3, the value of the Tahoma, \ windows \ meiryo.ttf from MS UI Gothic, change to meiryo

   HKEY_LOCAL_MACHINE \ System \ GWE \ Menu \ BarFnt

   • Change from 900 to 800 (decimal), the value of Ht

   HKEY_LOCAL_MACHINE \ System \ GWE \ Menu \ PopFnt

   • Change from 1200 to 850 (decimal), the value of Ht

This completes the configuration of the font.
Next time, you configure the connection packet.

This time, the setting of the "Titanium" desktop UI of WindowsMobile6.5.

1. Edit panels in CHome Editor
   • Remove the CText
   • Add CEmail
   • Add CClock
   • Add CMyPhotos
   • Add TitaniumWeather
2. (Set the locale of Weather Options TitaniumWeather in reference to a page here LocaleCode is select the one likely to relate to me)
   • Imabari, Ehime Prefecture: IMABARI ASI | JP | | JA005
   • Niihama, Ehime Prefecture: NIIHAMA ASI | JP | | JA005
   • Soka, Saitama: SOKA ASI | JP | | JA035
3. Fixed garbled Titanium Weather
   • Corrected to "℃" the "ー" in ¥ Program Files ¥ TitaniumWeather ¥ TitaniumWeather.mscr, saved in SJIS
4. Select the region in Start, Settings → System → →, Check that "Japanese (Japan)" regions
5. Select the alarm clock and the Start → Settings →, set "Tokyo GMT +9, Osaka" the Time Zone to

This completes the set of Titanium.
The following settings of the font.

To (BsB6.5.1G), I will not hear an environmental management system and guarantee to WM6.5.
(. Be out probably in the rewriting of the Hard-SPL)

1. PC with a USB cable to connect the S21HT, ActiveSync synchronization at
2. Unsigned-Hard-SPL-Diamond-OliNex.zip unzip, and run the ROMUpdateUtility.exe
3. Confirmed that they would advance the dialog, the progress bar terminal blackout, the PC is turned to 100%
4. Screen to enter the boot loader on the volume down + reset (reset button on the back), if it is successful OliNex1.40
5. RUU_Signed_1_93OliNex_HSPL_UnsignedEdition.zip unzip, and write using the ROMUpdateUtility.exe of ② the RUU_Signed.nbh
6. To enter the boot loader screen on the volume down + reset, if it is successful OliNex1.93
7. ROM file and copy the cab file directly under the root folder of internal storage
   • DIAMIMG.NBH (BsB6.5.1G)
   • DonSalari Tweaks.cab
   • MyRegistryTweaks.cab
   • amarullzBlueBlackTheme.cab
   • MoonWing StartMenuIcons.cab
   • MoonWing Advanced Configuration Tool v3.3.cab
   • LetsJapanWM61r07.cab
   • KeyTouchJapIMEr07.cab
8. Reset while holding down the "Volume down" + "←" button, boot up in ROM update mode, writing
9. Uncheck the "Enable faster ~" of Setting → connect → USB to PC and then restart the S21HT, synchronized with ActiveSync
10. Installed on the device DonSalari Tweaks.cab
11. Installed on the device MyRegistryTweaks.cab
12. Installed on the device BSB651G_MUI_JAP_6.0.92_1.cab
13. After installing the device amarullzBlueBlackTheme.cab, restart
14. After installing the device MoonWing StartMenuIcons.cab, restart
15. Installed on the device MoonWing Advanced Configuration Tool v3.3.cab
16. After installing the device LetsJapanWM61r07.cab, restart
17. After installing the device KeyTouchJapIMEr07.cab, restart

This completes the rough environment.
Titanium is a set of two, three font settings, the connection settings of the packet that will be described in Part 4.